CHROMED WHEEL WARRANTY

O’green Australia warrants that its wheels will be free from structural defects for five (5) years from the date of retail purchase. O’green Australia further warrants to the original purchaser that Chrome wheels will be free of cosmetic defects for a period of one (1) years from the date of retail purchase as special care is needed to maintain their original look (please see wheel maintenance guidelines). Each O'green wheel comes with unique serial numer around the wheel valve area.

This warranty shall be valid only when the wheels are returned to an authorized dealer along with the original proof of purchase. O’green Australia ’s obligation under this warranty shall be limited to the replacement of wheel which O’green Australia has declared to be defective.

O’green Australia shall inspect all warranty returns. Wheels covered by our warranty shall be replaced and returned to the sender freight prepaid. Wheels not covered by our warranty, if requested will be returned to the sender freight collect.

What is covered?

a) Peeling of the chrome finish.

b) Stress cracks in the wheel, provided there is no evidence of impact.

c) Bubbles in the chrome or other blemishes in the finish of the wheel.

d) Wheels that leak air.

e) Improper machining of the center bore or stud holes.

What is not covered? (Exclusions)

a) Serial number has been removed or unrecognized.

b) Wheels damaged or knocked out-of-round due to: tire installation, lowered suspension, impact, offroading, accident, racing, negligence,misuse or exceeding the load rating or tire diameter (see installation instructions).

c) Cosmetic damage caused by poor maintenance, exposure to corrosive agents and/or environments, impact, “curb rash”, road hazard or neglect.

d) Chrome chipping around the stud/center bore holes due to contact with installation tools.

e) Cosmetic warranty for wheels purchased as “blemished” (structural warranty still applies however).

f) Wheels claimed by someone other than the original purchaser.

g) Wheels transferred to another vehicle, resulting in an improper fitment.

h) Wheels that have been repaired or altered.

i) Wheels installation instructions have not been properly followed.

This warranty is given by O’green Australia and is in lieu of all other expressed or implied warranties, whether oral or written. All implied warranties, such as warranties of merchantability or fitness of a particular purpose, shall be limited to the duration of this warranty.Some States and / or Provinces do not allow limitations on how long an implied warranty lasts, and / or the exclusion or limitation of incidental or consequential damages, so one or more of the above limitations or exclusions may not apply to you.This warranty expires upon title transfer of any O’green Australia products by the original purchaser.No warranty or representation by anyone other than O’green Australia shall be binding upon O’green Australia .This shall be the limit of the liability of O’green Australia for defective goods and under no circumstances shall O’green Australia be responsible for any damages whatsoever, including consequential damages, economic damages, or lost profit.

CUSTOMER INFORMATION

After your wheels have been installed, make sure the installer completes the checklist on the installation instructions supplied with eachwheel, and that you have verified each step with them. Remember to re-torque the nuts or bolts after 40 kilometers of use. Failure to retorque the nut or bolts is unsafe and could cause a serious accident. Nuts and bolts must be re-torqued every time they are installed.Keep this document with the owner’s manual and give it to the new owner when the vehicle is sold.

WHEEL MAINTENANCE GUIDELINES

Chromed wheels require special care in order to keep them in good condition. Proper maintenance will prevent peeling, pitting and corrosion.In order to protect your wheels’ finish from deterioration and to prevent your warranty from being voided, we recommend that you follow

these steps:

1. Wash your wheels on a weekly basis with non-detergent soap and water, using a soft brush or sponge. Cleaning your wheelsfrequently will remove salt, dirt and brake dust that can be corrosive to the finish and destroy them in a short period of time.

2. Specialized chrome finish cleaners may also be used, but be very careful to follow product application instructions as they can easily dama ge the wheel finish if used incorrectly. A non-abrasive (without additional cleaning/polishing agents) automotive wax should be applied after cleaning to help maintain their appearance.

3. Beware of car washes that use steam cleaners, scouring pads, bristle brushes and / or tire cleaners. High temperatures, rough cleaning materials and corrosive chemicals can cause permanent damage to your wheels.

4. Never spray cold water on extremely hot wheels. Allow your wheels to cool before cleaning them. Extreme temperature change can cause damage or discoloration to the finish.

5. To store your chromed wheels, remove the center caps, then wash and dry all parts thoroughly. Place in a clean bag and keep in a dry place.

6. If you hit a curb or pothole, or have an accident and suspect structural damage, have your wheels inspected immediately by a licensed mechanic. If structural damage is found, replace the wheel immediately.